iframe page SP6000 Page Here

SP6000 Exhaust Clearances

Product & installation specifications are subject to change without notice.
Product installation must adhere strictly to the installation manual shipped with product!


Locate terminations:
a) not less then 3 feet above any forced air inlet located within 10 feet;
b) not less than 4 feet below or horizontally from, or one foot above,
any door, window or gravity air inlet into any building;
c) not less than two feet from an adjacent building and not less than 7 feet
above grade when located adjacent to a public walkway.

Mobile home installations must use a spark arrester.

NOTE: THIS UNIT IS NOT APPROVED FOR USE WITH A “DIRECT-VENT”
TYPE OF VENTING WHICH HAS NO VERTICAL PIPE.
A MINIMUM OF 5’ OF VERTICAL PIPE IS REQUIRED.